Skip to main content

Sound Test

SolvedVerified By Sound TestVerified By Sound Test

how do i test the bass response of my headphones

Ask By Brayden R.2,069 views

I want to know how low my headphones go. Is there a simple way to check bass without buying a measurement mic

Brand
Sony
Model
MDR-7506
Connection
Wired 3.5mm Jack
System
Windows 11
Browser
Chrome 131
Sample Rate
48 kHz
Output Channels
2 channels
Bass And SubwoofersHeadphones
Tool used in this discussionBass TestFind how deep your woofer or subwoofer can play
Open Free Tool
Short Answer

Play a slow Frequency Sweep from 20 to 200 Hz and note where you first hear the tone. That is your headphones' practical low limit.

Verified By Sound TestVerified By Sound Test
Xavier Cruz
Xavier CruzAudio Team
Frequency Sweep Specialist · 8+ years experience · Answered Apr 14, 2026

You do not need a mic for a rough check. Most closed headphones reach about 30 Hz, and where the tone becomes audible is a good guide.

After you make the change, play the Bass Test again to confirm the result. If the problem is still there, add your device, browser and what you tried in the replies so the team can narrow it down.

Step By Step Fix
  1. Use a quiet room and set the volume to a comfortable level
  2. Play the Bass Test or a slow sweep from 20 Hz upward
  3. Note the first audible pitch
  4. Repeat with the other earcup and compare
Sources
  1. NIOSH: Noise And Hearing Loss Prevention

Checked by Alistair Cross on . How we verify answers

Did this fix your problem?
Was this answer helpful?
Share this discussion

Community Replies 1

  • Luis CruzCommunity Member

    I could hear mine from 35 Hz, which matched the spec. Worth trying before you spend any money.

Add Your Reply

Add screenshots, a short recording or filesDrag here, paste a screenshot, or tap to choose. Up to 2 files, 8 MB each. JPG, JPEG, PNG, WEBP, GIF, TXT, LOG, PDF, MP3, WAV, OGG, M4A, MP4, WEBM

Similar Discussions Other Listeners Started

Tools Mentioned In The Answer

Audio ToolsFrequency SweepGlide 20Hz to 20kHz to find buzzes and dead spots
Open Free Tool
Xavier Cruz
Written and tested by

Xavier Cruz

Frequency Sweep Specialist at Sound Test

Xavier Cruz is the Frequency Sweep Specialist on the Sound Tester Audio Team. Dedicated to testing high and low frequency sweeps, sub-bass limits, and speaker rattling thresholds. Posts deep bass stress tests and acoustic sweeps on Threads. On Sound Tester he answers discussions about speaker rattles, buzzing at certain pitches and bass that cuts out, and checks each fix with the Frequency Sweep and Bass Test.

Frequency sweepssub-bass limitsspeaker rattle
  • 7 answers on Sound Test
  • 8+ years experience
  • Reviewed by Alistair Cross
View full profile linkedin.com

The Audio Team Behind These Answers

All 38 specialists
Brandon VanceBrandon VanceAudio & Acoustic Performance LeadDiana ChenDiana ChenHearing Test ArchitectAlistair CrossAlistair CrossHeadphone Benchmark LeadImogen BlakeImogen BlakeBinaural Beats EngineerCallum SterlingCallum SterlingSurround Sound AuditorGemma GallagherGemma GallagherTone Generator ValidatorHarvey FinchHarvey FinchSpectrum Analyzer LeadRishabh SharmaRishabh SharmaAudio DSP Engineer

Each answer is written by the specialist closest to the topic and checked by a second team member. How we verify answers

Answers are free general guidance from the Sound Tester Audio Team and community. They are not medical advice. For hearing loss, ringing or ear pain, see a doctor or audiologist. Opening a device can void its warranty, so check the maker's support first for hardware faults.

Free Sound Testers

Every tool runs in your browser. No sign up, no download, nothing uploaded.

All tools

Read Next On The Sound Tester Blog

All articles

Community Discussions

The newest replies from listeners and the Audio Team.

All discussions