monitor connected by hdmi but no sound from the speakers
HDMI monitors often become the default output and then play nothing. Set your speakers as the default device in Sound settings, or plug them into…

Surround Sound Auditor at Sound Test
Callum Sterling is the Surround Sound Auditor on the Sound Tester Audio Team. Focused on checking 5.1/7.1 spatial positioning accuracy, Dolby Atmos channel mappings, and sound leakage.
Callum Sterling is the Surround Sound Auditor on the Sound Tester Audio Team. Focused on checking 5.1/7.1 spatial positioning accuracy, Dolby Atmos channel mappings, and sound leakage. Runs gaming headset audio troubleshooting threads on X (Twitter). On Sound Tester he answers surround sound, soundbar and HDMI ARC discussions, and checks channel placement with the Surround Sound Test.
HDMI monitors often become the default output and then play nothing. Set your speakers as the default device in Sound settings, or plug them into…
For HDMI ARC to work, the soundbar must use the TV's ARC port, and the TV audio output must be set to the soundbar or HDMI ARC. Turn on HDMI-CEC and…
Windows must be set to 5.1 and the source must send surround. Pick 5.1 under Configure Speakers, and check the player or console outputs surround…
Most smart TV browsers can run the tests. Use stereo first, then check channels with the Surround Sound Test.
Code 10 means the device cannot start. Uninstall the driver, restart and install the latest one from the PC maker.
If only one site is silent, the tab, the browser mute or the app volume in the mixer is the cause. Unmute the tab, open the Volume Mixer and try a…
Windows picks the last connected device. Disable devices you never use, set the default for sound and communications, and check Apps volume and…
Dialogue that trails the picture is a delay problem. Turn off extra sound processing on the TV and soundbar, use the eARC port and adjust the TV's…
Stereo is clean, direct and favored by many competitive players. Virtual 7.1 can help with direction for some. Test both with a Surround Sound Test.
Quiet dialogue means the center channel level is too low or the receiver is downmixing. Raise the center level in the speaker setup and run the…
Atmos needs an eARC or compatible ARC connection, an Atmos source and the TV set to pass-through. Check the HDMI port and the TV audio format.
If the TV plays sound but the Xbox does not, check that the console sends the right audio format. Set HDMI audio to Stereo uncompressed, then try…
If only one TV app is silent, the app audio format is usually the problem. Change the audio output format to PCM or switch Dolby Digital Plus off…
When the Steam Deck is docked with no sound, open Quick Access, Audio and choose the HDMI device as output, then restart the dock and the TV if it…
If only the front speakers play, the receiver may be in a stereo mode or the source sends stereo. Choose a surround mode, check speaker setup and…
Each answer is written by the specialist closest to the topic and checked by a second team member. How we verify answers