bluetooth headphones lag behind the tv, lips dont match
Bluetooth adds delay, often 150 to 300 ms on basic codecs. Turn on the TV's audio delay or lip sync setting, or use a low-latency transmitter that…

Audio Codec Tester at Sound Test
Min-Seok Kim is the Audio Codec Tester on the Sound Tester Audio Team. Evaluates high-fidelity wireless audio latency, spatial tracking codecs, and digital sound output drivers.
Min-Seok Kim is the Audio Codec Tester on the Sound Tester Audio Team. Evaluates high-fidelity wireless audio latency, spatial tracking codecs, and digital sound output drivers. Connects with global consumer electronics engineers on LinkedIn. Based in South Korea. On Sound Tester he answers Bluetooth delay, codec and wireless headphone discussions, including lip sync problems on TVs.
Bluetooth adds delay, often 150 to 300 ms on basic codecs. Turn on the TV's audio delay or lip sync setting, or use a low-latency transmitter that…
Windows switches Bluetooth headsets to Hands-Free mode when the mic is on, which cuts quality. Use a separate microphone or pick the Stereo output…
Stutter on streaming but not calls usually points to the codec or a weak data link. Set the phone to SBC or AAC, turn off wireless charging heat and…
If the earbuds say connected but sound plays from the phone, the media audio profile is off. Turn on Media audio for the device and re-pair.
Frequent drops on Windows usually come from the Bluetooth driver or power saving. Update the driver, turn off power saving for the adapter and…
Short dropouts at close range usually mean interference or a phone battery saver. Turn off battery optimisation for the music app and re-pair the…
Two sets of headphones need dual audio support in the phone or a transmitter that supports two receivers. Many phones allow it under Bluetooth…
Bluetooth signals are weak through the body, so a back pocket can block the link. Move the phone to the front, the opposite side from the headphone…
Each answer is written by the specialist closest to the topic and checked by a second team member. How we verify answers